AEGIS Office Chair PJ Selangor | Lowest Price BIFMA
RM390.00 - RM480.00
Support various customization
01 Single purchase, can arrange own pick up from our store by Grab Express, Lalamove or any other transporter. Please consult before purchase.
Support customization for Single purchase, can arrange own pick up from our store by Grab Express, Lalamove or any other transporter. Please consult before purchase.
| Specification Category | Aegis Technical Specification |
| MODEL | AEGIS HIGH BACK | AEGIS MEDIUM BACK |
| CHAIR BASE | HEAVY-DUTY 350MM NYLON BASE |
| CASTORS | 60MM SMOOTH-ROLLING HEAVY-DUTY CASTORS |
| MECHANISM | IMPORTED MULTI-ANGLE TILT RECLINING MECHANISM WITH TENSION CONTROL |
| ARMREST | 3D ADJUSTABLE ARMREST (HEIGHT, SLIDE FORWARD/BACK, PIVOT) |
| LUMBAR SUPPORT | DYNAMIC 3D ADJUSTABLE LUMBAR SUPPORT |
| GASLIFT | IMPORTED HEAVY-DUTY HYDRAULIC GASLIFT |
| FOAM | HIGH-DENSITY MOULDED FOAM |
| MATERIAL | BREATHABLE HIGH-TENSION MESH (BACKREST) & PREMIUM FABRIC (SEAT) |
| CERTIFICATION | SGS TEST REPORT NO. SDHL260300383301FT — ANSI/BIFMA X5.1-2017 (R2022), RESULT: PASS |
| AEGIS HIGH BACK SIZE | 665W x 700D x 1170H – 1240H mm (Backrest Height: 700mm) |
| AEGIS MEDIUM BACK SIZE | 665W x 670D x 1030H – 1100H mm (Backrest Height: 560mm) |
| WARRANTY | 400 DAYS MANUFACTURING DEFECTS WARRANTY |
AEGIS 3D Ergonomic Mesh Chair | Best Office Chair for PJ & Selangor
If you run an office in Petaling Jaya, Damansara, or anywhere in the Klang Valley, you've probably run into the two extremes of office chairs. The cheap online special looks fine in photos, arrives flat-packed with a bag of loose screws, and by month three the seat foam has gone flat, the gas lift sinks mid-meeting, and staff start complaining about lower back pain. The premium imported brand solves those problems, but a large share of what you're paying for is shipping, showroom rent, and brand marketing rather than the chair itself.
AEGIS sits in between: commercial-grade durability, full 3D adjustability, and independently certified safety specs, at a price that stays realistic for a corporate fit-out.
We Tested It Before We Sold It

Anyone can put an "ergonomic" label on a plastic chair. Before AEGIS went into our catalogue, it was sent to SGS for independent testing against ANSI/BIFMA X5.1-2017 — the standard commercial procurement teams use to check a chair's base, frame, and tilt mechanism hold up under real daily use. It passed.
SGS Test Report: SDHL260300383301FT
If your procurement team needs the official test documentation before signing off on a purchase order, contact us and we'll send the full report directly.
Where Cheap Chairs Cut Corners
| Typical Budget Chair | High-End Imported Brand | AEGIS 3D Mesh Chair | |
|---|---|---|---|
| Safety Certificate | None | BIFMA certified | ANSI/BIFMA X5.1 (SGS Report SDHL260300383301FT) |
| Seat Cushion | Cut scrap foam, flattens fast | Moulded foam | High-density moulded foam, holds its shape |
| Lumbar Support | Fixed plastic bump | 2D or 3D adjustable | Dynamic 3D lumbar |
| Armrests | Fixed plastic | 3D adjustable | Full 3D: height, slide, and pivot |
| Warranty | Rarely stated | Varies by brand | 400 days against manufacturing defects |
| Fabric Choice | Usually one colour only | Limited options | 2 weave options across 9 colours |
Built for 8-Hour Days in Malaysia's Climate
Mesh office chairs dominate modern Malaysian offices for a reason. PU leather and gaming chairs look good on day one, but by mid-afternoon in a room where the air-con is struggling, they turn into a sauna.
Breathable mesh that actually breathes. High-tension mesh lets air flow through the backrest so your back stays dry, whether you're in a high-rise office or a shop-lot setup.
Moulded foam, not scrap foam. Dense moulded foam distributes body weight evenly and won't compress into a hard, wooden feeling after a few months of daily sitting.
Why the seat stays black. You can pick vibrant corporate colours for the mesh backrest, but the seat cushion is always commercial black fabric — it hides daily dirt, resists denim dye transfer, and survives a spilled coffee without looking worn.
No shoulder hike. Fixed armrests force your elbows into awkward angles all day. AEGIS's 3D armrests adjust up, down, forward, back, and pivot inward so your arms rest level with your keyboard.
Choose Your Backrest Colour

Match your office colour scheme with two commercial-grade mesh weaves across 9 colours (Black, Grey, Light Grey, Blue, Mist Blue, Green, Orange, Red, White):
- AS-MA Series — a clean, smooth solid weave for a sharp, modern corporate look
- AS-PW Series — a heavier, dual-tone textured weave for a more executive finish
Just tell us your fabric code and colour when requesting a quote (e.g. "AS-MA06 Blue").
The Likelihood
Offices that furnish with a properly tested, genuinely adjustable chair backed by a real warranty tend to avoid the two most common regrets: chairs that need replacing within a year, and staff who still complain of back or shoulder strain because the chair never actually adjusted to fit them. AEGIS is built to avoid both, and comes with 400 days of warranty coverage against manufacturing defects.
Whether you need a single unit or a bulk order for a new office floor, get in touch and we'll quote based on your requirements.
Delivery Coverage
| Region | Areas Covered | Delivery Method |
|---|---|---|
| Klang Valley | Kuala Lumpur, Petaling Jaya, Shah Alam, Subang, Klang, Puchong, Cheras, Kota Damansara | Direct delivery |
| Negeri Sembilan & Melaka | Seremban, Nilai, Port Dickson, Melaka City, Ayer Keroh | Direct delivery |
| Perak | Ipoh, Taiping, Tanjung Malim | Direct delivery |
| Northern Region | Penang, Kedah, Perlis | Direct delivery |
| East Coast | Pahang, Kuantan, Kota Bharu, Kuala Terengganu | Direct delivery |
| Singapore | — | Direct delivery |
| Sabah, Sarawak & Labuan | — | Via appointed forwarder |
FAQs
1. Is AEGIS an affordable option among BIFMA-certified office chairs in Malaysia?
Yes — finding a genuinely SGS-tested BIFMA X5.1 chair with full 3D armrests, 3D lumbar, and moulded foam at this price point is uncommon. Most chairs in this bracket skip independent testing entirely.
2. Should I get AEGIS or a gaming chair?
If you're working 8 hours a day, AEGIS is the better fit. Gaming chairs have bucket-style side wings that curl your shoulders inward, and sealed leather surfaces trap heat. A mesh task chair gives you proper spinal alignment and airflow.
3. Can we try the chair before placing a bulk company order?
Yes, you're welcome to visit our showroom in Kota Damansara to sit in it, adjust the lumbar, and test the armrests and seat foam for yourself.
4. Do you deliver to Petaling Jaya and Damansara with installation?
Yes, we deliver with installation service across Klang Valley, including PJ, Damansara, and the wider Selangor area.
5. High Back vs Medium Back — which should I pick?
Pick High Back (1170mm–1240mm) for a primary desk where you want integrated neck and head support. Pick Medium Back (1030mm–1100mm) for meeting rooms, hot-desking rows, or open-plan areas where clear sightlines across the office matter more.
6. Can my procurement team verify the BIFMA certification?
Yes. AEGIS passed under SGS Report No. SDHL260300383301FT. Contact us and we'll send the documentation directly to your procurement team.
7. What warranty does AEGIS come with?
AEGIS comes with 400 days of warranty coverage against manufacturing defects.
8. Can I customize the backrest fabric colour?
Yes, choose between AS-MA (solid) or AS-PW (textured weave), each in 9 colours. Just specify your fabric code when requesting a quote.
9. Why is the seat always black regardless of backrest colour?
Black resists daily wear and denim colour-transfer far better than lighter colours, keeping the chair looking presentable for years of office use.
10. What makes AEGIS different from a standard office chair?
A genuine full-chair BIFMA X5.1 certification combined with dynamic 3D lumbar support, full 3D armrests, and a 400-day warranty — most chairs at this level only offer one or two of these, not all three.
11. Can I order AEGIS in bulk for an office fit-out?
Yes, we handle bulk orders and can quote based on your quantity and fabric preferences.
Our profession are as follows
-
Steel filing cabinets
-
Steel drawer & steel lockers
-
Steel Cupboard
-
Steel wardrobes
-
Mobile compactors
-
Office Furniture
-
Office Chair
-
Office Table
-
Office System Partition
-
Office Wooden Cabinet
*Enjoy free delivery & installation on orders over RM500 or more in the Klang Valley or major Selangor area.
*Kuala Lumpur Klang Valley, Petaling Jaya & major Selangor area deliver within 3-7 working days after payment.
*Free delivery & installation with T&C apply
*Can purchase after view sample unit at showroom
Outstation Area : Negeri Sembilan - Melaka - Johor - Pahang - Terengganu - Kelantan - Kedah - Penang - Perak - Malaysia.
Call Us 012-609 9391 To Get The Lowest Delivery Rate For Outstation
Frequently Asked Questions for AEGIS Office Chair PJ Selangor | Lowest Price BIFMA
AEGIS 3D Ergonomic Chair: should I choose High Back or Medium Back for my desk?
Is AEGIS a BIFMA certified office chair and can procurement verify the SGS report?
Why pick AEGIS as the best office chair over gaming or cheap chairs?
Can I try AEGIS in person before ordering — is your showroom in Kota Damansara?
Inquiry - AEGIS Office Chair PJ Selangor | Lowest Price BIFMA